Request a quote
HomeProductsAGDS “Energia”
AGDS “Energia”

Automatic gas distribution stations “Energia”

Complete block stations for 1 000 – 100 000 Nm³/h: cleaning, heating, pressure reduction, metering and odorization without an operator.

Designed in accordance with EN 12186, PED 2014/68/EU, ATEX 2014/34/EUGas distribution stations

Automatic gas distribution stations “Energia” (AGDS) with a nominal capacity of 1 000, 3 000, 5 000, 10 000, 15 000, 30 000, 50 000, 75 000 and 100 000 Nm³/h are designed to reduce the high pressure (7.5 MPa > P > 1.2 MPa) of natural, associated petroleum or manufactured gas to a set low pressure (1.2 MPa > P > 0.2 MPa) and maintain it with the specified accuracy, measure the gas flow and odorize the gas at the set rate before supplying it to consumers — in normal mode without the participation of a station operator.

The stations are used to supply gas to towns, industrial enterprises and other consumers from main pipelines and their branches.

What the system provides

  • Gas cleaning from mechanical impurities and condensate
  • Gas heating before pressure reduction to prevent hydrate formation
  • Two-line pressure reduction with automatic switch-over to the standby line
  • Commercial gas metering with a flow computer
  • Automatic odorization proportional to the flow rate
  • Automated control system with transmission of data to the dispatch centre
  • Block-container design with heating, lighting, ventilation and gas concentration monitoring

Technical data

Main parameters

Nominal capacityNm³/h1 000 / 3 000 / 5 000 / 10 000 / 15 000 / 30 000 / 50 000 / 75 000 / 100 000
Inlet pressureMPa1.2 – 7.5
Outlet pressureMPa0.2 – 1.2 (set by the customer)
Outlet pressure control accuracy%±2.5 (accuracy class of the regulator)
Working mediumNatural, associated petroleum or manufactured gas
Operating modeAutomatic, without a permanent operator
Ambient temperature°C−40 … +50
DesignBlock-container, complete factory assembly

Composition

Gas cleaning unitFilter separators / cyclone-type dust collectors
Gas heating unitPG-type heaters with intermediate heat carrier
Pressure reduction unitTwo lines (working + standby), pilot-operated regulators, safety shut-off valves
Metering unitTurbine / ultrasonic / rotary meters with flow computer
Odorization unitKOG (pump-type) or KlOG (valve-type) complex
Control systemSAU GRS, Modbus TCP / RS-485 to the dispatch centre

Applications

Gas supply of towns and villagesIndustrial enterprises and power plantsBranches from main pipelines
Request a quote

Request a quotation

Tell us about your site: gas flow rate, inlet and outlet pressure, required functions. We will prepare a technical proposal within 3 working days.

By submitting the form you agree to the processing of your data for the purpose of answering your request.